Thermocouple Accessories
|
We are catering thermocouple accessories, RTD (resistance temperature detectors) cables, M.I. and Cables to our clients based in different parts of the globe. These are fabricated using quality raw material with the help of state-of-the-art machinery. Before the final consignment, these are duly tested at par with international standards. Also, these are available in different specifications at competitive prices.
|
View Enquiry Basket
 | Brass Terminals | | |
| We manufature ceramic block & brass terminals. These nickle plated brass terminals are fitted with nickel plated brass screws. They are usually made up of hard material such as steatite and are available in many types such as round, square and pillar types.
Type:- Pillar Type
- Round Brass Terminals
- Square Brass Terminals
Ceramic Block- Available only in Steatite (hard) type
- Adjustable for 23mm, 33mm & 45mm PCD of temperature sensor (thermocouple head) enclosures
|
| Temprature Sensor Enclosers | | |
| We provide stainless steel temperature sensor enclosers. They are powder coated and external earthing is also provided along with it. Our range of sensor enclosures have a smooth finish and custom made designs. Following are the various available types of temperature sensor enclosers.
Types:- Mini Head (Threaded cap / hinge type)
- Whether Proof Head (general purpose / IP 65)
- Plastic Head
- Whether Proof Big Head (IP 67)
- Flame Proof Head
- Stainless Steel Head
- Imported Head
- Hinge type
Technical Data:
| Instrument Enteries | 6mm, 1/4"BSP, 3/8"BSP, 1/2"BSP, 3/4" BSP/NPT (OR) Equivalent | | Conduit Entries | 3/4"ET, 1/2"BSP/NPT (OR) Equivalent | | PCD | M3@23mm/ M4@33mm/ M4@45mm | | Finish | Powder Coated | | Chain & Hardware | Provided | | Earthing | External | | No. of Cable Enteries | One/Two | | Construction Material | Aluminium alloy LM:6/SS 304 | | Warning /Protection | Do not open when Energized (IP:65) | |
| Flanges and Compression Fittings | | |
| We manufacture compression fittings and steel flanges of different grades & standard ranges that comply with national & international standards. We generally use brass and stainless steel to produce these flanges and compression fittings. Our flanges are available in different grades and qualities to meet various applications in the industry.
Flanges: - SS Round Flanges
- Powder coated aluminium adjustable eleptical flanges of center hole diameter 6mm/ 22.5mm with screw for standard PCD 70mm
- Powder coated aluminium adjustable round flanges of center hole diameter 6mm/ 22.5mm with screw for standard PCD 70mm
Adjustable Compression Fittings:
| Material | MS /Brass / SS | | Types | Swage locks/Parker, with ferrule | | Available Size | 1/2" BSP, 1/2"NPT, 1/4"BSP, 3/8"BSP, 3/4"BSP, 1"BSP, 1"NPT (for 3mm / 6mm / 8mm / 10mm / 12mm stem) | | Available in | Male and Female |
Plugs:
| Material | MS /Brass / SS | | Available Size | 1/4", 3/8", 1/2", 3/4", 1" BSP & 3/4" ET & 1/2" NPT, 1 NPT (with or without center hole) |
Equal Union:
| Material | MS, Brass, SS | | Available Size | 1/4"BSP x 1/4"BSP, 1/4"BSP x 3/8"BSP or 3/8"BSP x 1/4"BSP, 1/4"BSP x 1/2"BSP or 1/2"BSP x 1/4"BSP, 1/4"BSP x 3/4"BSP or 3/4"BSP x 1/4"BSP, 3/8"BSP x 3/8"BSP or 1/2"BSP x 3/8 BSP 3/8"BSP x 3/4"BSP or 3/4"BSP x 3/8"BSP, 1/2"BSP x 1/2" BSP, 1/2"BSP x 3/4"BSP or 3/4 BSP x 1/2" BSP x 3/4"BSP x 3/4"BSP (with or without centre hole) | |
| Bayonet Adapters | | |
| We provide bayonet caps, bayonet adapters and bayonet holders. They are available in both single slot and double slot and are made up of chrome plated brass. Our range of bayonet adapters complys with the national & international standards.
Bayonet Cap (Holder)
| Material | Chrome plated Brass | | Available Size | Ø11mm, Ø12.5mm, Ø14.5mm, Ø16.5mm | | Available in | Single or Double Slot |
Adaptors:
| Material | Chrome plated Brass | | Available Size | 1/8"BSP, 1/4"BSP, 1/2"BSW, 3/8"BSP, 5/8"BSW | | Available in | Single or Double Pin | |
| Thermocouple Sensors Assemblies | | |
| Our thermocouple sensors assemblies comprises of SS pipes, SS spring & brass holder. These are available in various types such as a washer, straight spring, LRB spring loaded with bayonet, LBF spring loaded with bayonet, transition etc. Our flanges are available in different qualities to meet various applications in the industry.
| Material | SS Pipes, SS Spring & Brass Holder |
Types:- Washer
- Straight Spring Loaded Bayonet
- LRB Spring Loaded with Bayonet
- LBF Spring Loaded with Bayonet
- 'L' Spring Loaded with Bayonet
- Tip Adjustable with Bayonet
- Spring Movable with Bayonet
- In melt (Bolt)
- Fully Adjustable with Bayonet
- Straight Rotating Spring with Bayonet
- 'L' Rotating Spring with bayonet
- Transition (Hex Bush)
|
| M. I. Cables | | |
| We manufacture and export a wide variety of M.S. cables. These are available in grey color and find their applications & usage in a varied number of industries. We are able to design styles in various specifications according to the drawings and samples by the clients.
| Available Materials | SS 316, SS310, Inconel 600 | | Available Sizes | Ø 1.5mm, Ø 3mm, Ø 4.5mm, Ø 6mm, Ø 8mm | | Available Type | Simplex/Duplex |
For RTD:
| Available Sizes | Ø 3mm, Ø 5mm, Ø 6mm | | Available in | 4 wire / 6 wire in SS 316 only |
Note: upto 100 mtr single length will be provided. |
| M.I. Spring Loaded Assemblies | | |
| We provide M.I. spring loaded assemblies such as SS base plate, spring loaded SS base plate, SS base plate with pipe and with spring, SS base plate with pipe, gasket for RTD & thermocouple for Ø5mm, Ø6mm, Ø8mm of tubes. These are suitable for 33mm PCD (Standard). |
| Plug Sockets | | |
| Plug socket are available in either small (flat pin), big (round pin). Plugs sockets are devices that connect appliances, portable light fixtures, and other electrically-operated devices to the commercial power supply so that electric power can flow to them. They have contacts that are pins or blades that connect mechanically and electrically to holes or slots in the socket. Our range complys with the national & international standards.
Type: J, K, T, R, RTD
Available in Indian & Imported make
SS Clamp:- To fit plug socket with flexible lead wire
- To fit socket with MI cables
|
| RTD Elements | | |
| Resistance temperature detectors (RTD), as the name implies, are sensors used to measure temperature by correlating the resistance of the RTD element with temperature. Most RTD elements consist of a length of fine coiled wire wrapped around a ceramic or glass core. The element is usually quite fragile, so it is often placed inside a sheathed probe to protect it. The RTD element is made from a pure material whose resistance at various temperatures has been documented. The material has a predictable change in resistance as the temperature changes; it is this predictable change that is used to determine temperature.
| RTD | Resistance Temperature Detector operate on the principle of change in electrical resistance wire as a function of temperature. | | Available Type | Film Type, Wire Wound Ceramic Type, Wire Wound Sandwich between glass epoxy sheets, in simplex/ duplex in, class A / class B | | Size Available in Film Type | 1.5 x 2.0mm, 2 x 5mm, 2 x 10mm & SMD type with lead wire | | Size Available in wire wound ceramic type | 1.6 x 15mm, 1.6 x 20mm, 1.6 x 30mm, 2.0 x 15mn 2.0 x 20mm. 2.0 x 30 mm, 3 x 15 mm. 3 x 20mm. 3 x 30mm, with lead wire | | Size Available in Glass Epoxy type | 2 x 8 x 45mm, 2 x 8 x 150mm, 2 x 8 x 200mm, with standard I mtr long Teflon / 3 core wire | | Available Resistance | 100 ohms is standard 50, 200, 500, 1000 ohms are available on request | |
| Ceramic Insulators | | |
| We manufacture and export a wide variety of ceramic insulators, high temperature ceramic tube, high temperature cement and SS conduits. Ceramic insulators are often used as electrical insulators in chemically and electrically hostile environments. These ceramic insulators are often prepared from compositions containing lead, such as lead silicate. The lead is utilized to lower the firing temperature of the ceramic material and to promote bonding and sintering of other constituents in the ceramic used to form the insulator. High voltage insulators of ceramic materials are mainly used in outdoor switching stations and outdoor lines.
| Available in | 1 hole / 2 hole / 4 hole / 6 hole for Simplex, Duplex in Round & Oval. | | Available size | Ø2.7mm to Ø13.5mm |
High Temperature Ceramic Tube
It is use for high temperature thermocouple R type & S type up to 1600°C
| Available in | KER710, KER610 | | Available in | One end closed | | Available size | 6mm x 4mm, 8mm x 5mm, 10mm x 6mm 12mm x 18mm, 15mm x10mm, 20 mm x 15mm, 24mm x 18mm | | Length | 350mm, 530 mm, 600mm, 650 mm, 740mm, 900mm, 1030mm, 1430mm |
High Temperature Cement
| Available in | Water mixing type/ Liquid solution mixing type | | Available brand | "Jylocem" & Zirocem" |
SS FLEXIBLE CONDUIT
| Available size | 5 mm x 3 mm ,8mm x 6mm ,10 mm x 8mm, 12mm x 10mm | |
| Thermocouple Wires | | |
| Manufactured to extremely high tolerance and suitable for the most demanding applications in a wide range of industries, our range of thermocouple wires, cables are used for temperature measurement. These are available in compensating and extension grade forms. Moreover, we offer our clients with K and J type of thermocouple wire. We also provide RTD cables, teflon cables and FG wires, as per the requirements of the clients.
| Available in | 10, 12, 14, 16, 18, 20, 24 & 36 SWG for K & 20, 24, 26, 30, 36 for J |
Thermocouple Cable
| Available in | Extension grade /Compensating Grade | | Available Size | 1/22, 1/24, 1/26, 1/30, 3/22, 3/24, 7/30, 7/36, 14/36 | | Available Insulation | PVC / PVC, PVC/ASB/ASB, FG/FG, FG/FG/SS, TEF/TEF, TEF/TEF/SS, TEF/FG/SS, TEF/PVC |
For RTD (in SPC Conductor)
| Available Size | 24/7/32, 26/7/34 | | Available insulation | TEF/TEF, TEF/TEF/SS, TEF/FG/SS, TEF/SILICON RUBBER | | No of core | 2 core / 3 core / 4 core / 6 core |
TEFLON/ FG WIRE
| Available in | 0.5 mm², 0.75 mm² ,1. 0 mm², 1.5mm²', 2.5 mm², 4.0 mm², 6.0 mm², 10.0 mm² | |
|
 Product
Showcase View all our products / services as a slide show. play now
|
